Posts Tagged ‘sanding sealer’

Do it Best Sanding Sealer

November 7, 2008

IMG_0738bMade by the Sherwin Williams Company, the Do it Best sanding sealer is NOT the same as WOOD CLASSICS FASTDRY SANDING SEALER from Sherwin Williams. While very similar, the Do it Best brand is thinner and not fast dry but dries quickly. Both sand the same.

IMG_0739bLooks the same as WOOD CLASSICS FASTDRY SANDING SEALER but smells different. Between the two sanding sealers, I prefer to spread Do it Best  vs. WOOD CLASSICS FASTDRY because you have more working time. I don’t believe the performance of the sealer was degraded even though it is thinner.

IMG_0736aThe baseboard on the left has Do it Best Sanding Sealer on it and sanded nice and smooth with a 3M Pro-Pad.

I recommend it! It basically performs the same as any other sanding sealer except Minwax Sanding Sealer.

UPDATE: November 12, 2008
I recently used two gallons of this sanding sealer on poplar trim and I have to admit I like it better than, Sherwin Williams FastDry, Benjamin Moore SuperSpec, ICI Wood Pride Sanding Sealer to name a few. It did not excessively raise the grain and sanded very easily in comparison to other sealers. This sealer is the thinnest of the bunch but performed best overall.

MINWAX Sanding Sealer Pt 2

November 5, 2008

IMG_0556 - Copy

I recently posted on the MINWAX Sanding Sealer in October but after preparing for a review on sanding sealers I thought I better leave this one out. This product is not at all like the sanding sealers you are probably used to. I’m not certain I would call this product sanding sealer at all in comparison to all the others.

Here is what you should know about this applying this product.

Number one, you need to have smooth bare wood to start because this sealer will not allow you to sand off anything but lint and I’m not joking. The sealer itself doesn’t allow you to cut through it but rather sand off anything on the surface and barely at that. So if you have slight rough wood under the sealer, you wont be able to get to it.

IMG_0736a Number two, If you apply this product to poplar trim for example, not only will the poplar soak up the sealer like a sponge but there is no way in hell you will get it baby ass smooth like you can with any other sealer out there. If you ever sanded polyurethane, this is far worst.

The photo above shows Do It Best brand sanding sealer on the baseboard and Minwax sanding sealer on the casing, both sanded. Notice how the baseboard clearly sanded smooth and to a powder where the casing was not.

Number three, call me Caption Obvious but there is something about calling a product "sanding" sealer when you cant sand it.

MINWAX 2hr Sanding Sealer

October 22, 2008

IMG_0558 - Copy

Sanding Sealer is the single most important component to finishing stained trim and doors yet so many people know little about it. One of the more common methods people (DIY) are using today to finish woodwork is one coat of MinWax stain and 1-2 coats of MinWax polyurethane and often they don’t bother sanding between coats.

If you want nicely finished woodwork then after you apply your stain to the trim and doors the 2nd step to finishing them is applying sanding sealer. Most sanding sealers dry super fast and can be sanded the same day but for outstanding results its best to wait a day. The sealer becomes more hardened and sands so much easier and smoother a day later.

IMG_0559 - Copy

Use a White China or Black China brush to apply sanding sealer. The White China will provide better results and holds more vs. black china.

It is not necessary to apply sanding sealer heavily. It is important to be sure the area absorbed the sealer enough before you move on. I apply a nice load to an area and work it in quickly and move the rest of the load off into the next area. I want the area saturated but not left heavy on the surface.

6 STEPS to Smooth Woodwork

1) Stain your trim
2) Apply sanding sealer (wait 1 day)
3) Sand the sanding sealer smooth
4) Vacuum with a shop vac (some people like to use a tac-cloth too)
5) Fill nail holes
6) Apply your compatible clear coat.

More on Sanding Sealer here.

SPECIAL NOTE: If you are familiar with ICI Wood Pride Sanding Sealer, Sherwin Williams, Cabot or Benjamin Moore’s SuperSpec, the MINWAX Sanding Sealer is nothing like them. The MINWAX is more like sanding polyurethane. Its best to have your wood sanded smooth prior to staining because MINWAX Sanding Sealer will only allow you to sand what’s on the surface where the other sealers listed allow you to cut deeper than the surface.

Part 2. More on this Sealer here.

ICI Sanding Sealer

October 24, 2007
I am just going to cover briefly using ICI Dulux Wood Pride Sanding Sealer with a brush, roller and an HVLP.

We use sanding sealer as part of our wood finishing process. Once the stain is applied and dry, I apply sanding sealer to raise and lock down the grain of the wood allowing me to sand the sealer baby smooth before applying a varnish. Many guys think sanding sealers are all created equal. Here is a secret, they’re not. Sherwin Williams isn’t the same as ICI’s and neither of them are anything like MinWax Sanding Sealer or Cabots sealers. Now that Sherwin Williams has a hold on Minwax, maybe the two are the same now.

Brushing:
This product is pretty straight forward although you have little time to work with it. It is best to keep moving ahead and try not to back brush previously wet areas.

Rolling:
It is not recommended to roll sanding sealer and leave it as is. I recommend always laying off with a brush. Work in small areas and use a Mohair short nap cover.

Spraying: When using an HVLP you may find it beneficial to slightly reduce the sealer. A formula of 24 oz. sanding sealer to 8 oz. thinner is sufficient to allow fast steady flow from the gun. Reducing should allow you to dial in your gun with minimal air flow. My air flow is almost all the way to off. I use a #3 projector set for sealer.

Dealing with drips and sags:
Yep, even I get them from time to time and I highly recommend keeping an eye on your work as you go. Every so often take a look back at your work. If you can, try to remove sags with a dry oil brush by feathering the sag out. If the sag had too much time to dry but is still soft, grab your 5-in-1 and shave it off carefully. If the sag or drip has dried completely, use a single edge razor blade and shave it off very carefully, sand smooth and repair.

About the photo: The photo shows ICI sanding sealer over stained poplar.

Also look at Do it Best Sanding Sealer


Follow

Get every new post delivered to your Inbox.